- none/none 36.4%
- admin/admin 18.2%
- none/admin 18.2%
- cisco/cisco 18.2%
- config/config 9.1%
Why use private network in 192.168 range?Private Network is a common practice in company and classical user but less for them. It's not necessary to have public address for each element. Futhermore, public address can change anytime when we reset router when private address is static most of the time. Plus, lack of public IPV4 Address tend to increase popularity of private IP Address.
How to login 192.168.1.245. in 5 Steps
1. Check Default Credentials 192.168.1.245.
Access your Router Panel with 192.168.1.245. IP address will allow you to change the settings that your Router brand provides, like Huawei, Linksys, TP-Link, Asus ... To do that, verify behind your router manual to get defaut login of IP Address
2. Launch cmd Software
Jump to Fifth step if you have already you Default Gateway IP Address. Otherwise Launch command software. Here, we take Windows for example. Search in search bar on Windows the word "cmd" and click on "Command Prompt" like picture bellow
3. Get Default Gatewap IP Address with specific Command
Now, write on cmd "ipconfig" and tap enter. If you are on Linux or macOS, write "ifconfig". Once it's done, look at "Default Gateway" section like picture bellow. If you're connected to Ethernet, check on "Ethernet" section else "Wireless LAN adapter Wi-Fi" part. It's this IP Address -->192.168.1.245.? Good you've probably right!
4. What is your default IP Address?
It is 192.168.1.245.? If you click on the button below and if it's doesn't work, may be you should try to connect on another because of your anti virus in some cases. You can temporarily turn off your anti virus to Access your Admin panel on 192.168.1.245.
5. You have Default IP Gateway
Once you know your default IP Address, try to click on the LOGIN button underneath. If you don't have defaut credentials to login, jump to Router Username and Password List to find YOUR default credentials. Check your Router brand and model behind and come back here te select right Brand and Model.
If it doesn't work, then 192.168.1.245. is not your router's IP address. Once you know your router's IP address, introduce it into your browser's URL Address. You'll be directed to the user login panel. There introduce your router user and password.
If you forgot your username and password you can follow these instructions to recover them. If you haven't changed the default user and password that comes with the router you can consult our router default usernames and passwords list. Once you're in the router's admin panel you'll be able to modify and change all internet settings.
Enter 192.168.1.245 instead of 192.168.1.245.1
The 192.168.1.245.1 is wrong, the correct IP is 192.168.1.245. It doesn't matter, you should just enter the correct IP which is 192.168.1.245
192.168.1.245 is a Private IP Address for use only inside of a Private Network. This IP Address may be utilized with an IP Address, and other many devices. You are trying to find the login for your router? You are in a good place.
Router Username and Password List for 192.168.1.245.
You haven't changed your router's username and password? Sounds good! The following listing affords the Default Credentials. Click your router from the List:
192.168.1.245. Router Admin Passwords and Login IP 192.168.1.245. is an IP address like Linksys, TP-Link and others manufacturers use as an access point or gateway. Firms give router admin access in this address to allow network administrators to configure their routers and networks. Concretely, you can control Security Options, DNS, proxy, LAN, Network Management, IP QoS , WAN, WLAN settings, DSL, ADSL, MAC, WPS block; amongst others.
List of Router's Username and Password
If you haven't changed your router's username and password. The following list provides the default credentials. Click your router from the list below:
I can't find correct IP Address or my Username & Password!
If you're been trouble to access your router at 192.168.1.245 (long loading or not loading at all), your network might be using another addess such as 192.168.0.32, 10.0.0.1 or 192.168.2.1. In that case check our router IP address list. You can also read our tutorial above to find your router's IP address for more help. Likewise, if you fail to find your crendentials to connect to your Router, i recommand to read your manual, or, ultimately, reset your Router to recover your default Username and Password. Until it't done check above the way to reset te factory settings.
I forgot my router’s Username and Password for 192.168.1.245 IP Address :/ What do I should do?
You Never changed it? Try to find them in the list, in any other case to turn the router back to factory settings, you need to hold on the button for 10 seconds (about) using a needle or toothpick then you will be able to find the defaults credentials for 192.168.1.245in the list!