- none/none 36.4%
- admin/admin 18.2%
- none/admin 18.2%
- cisco/cisco 18.2%
- config/config 9.1%
Why use private network in 192.168 range?Private Network is a common practice in company and classical user but less for them. It's not necessary to have public address for each element. Futhermore, public address can change anytime when we reset router when private address is static most of the time. Plus, lack of public IPV4 Address tend to increase popularity of private IP Address.
How to login 192.168.1.245. in 5 Steps
1. Check Default Credentials 192.168.1.245.
Access your Router Panel with 192.168.1.245. IP address will allow you to change the settings that your Router brand provides, like Huawei, Linksys, TP-Link, Asus ... To do that, verify behind your router manual to get defaut login of IP Address
2. Launch cmd Software
Jump to Fifth step if you have already you Default Gateway IP Address. Otherwise Launch command software. Here, we take Windows for example. Search in search bar on Windows the word "cmd" and click on "Command Prompt" like picture bellow
3. Get Default Gatewap IP Address with specific Command
Now, write on cmd "ipconfig" and tap enter. If you are on Linux or macOS, write "ifconfig". Once it's done, look at "Default Gateway" section like picture bellow. If you're connected to Ethernet, check on "Ethernet" section else "Wireless LAN adapter Wi-Fi" part. It's this IP Address -->192.168.1.245.? Good you've probably right!
4. What is your default IP Address?
It is 192.168.1.245.? If you click on the button below and if it's doesn't work, may be you should try to connect on another because of your anti virus in some cases. You can temporarily turn off your anti virus to Access your Admin panel on 192.168.1.245.
5. You have Default IP Gateway
Once you know your default IP Address, try to click on the LOGIN button underneath. If you don't have defaut credentials to login, jump to Router Username and Password List to find YOUR default credentials. Check your Router brand and model behind and come back here te select right Brand and Model.
If it doesn't work, then 192.168.1.245. is not your router's IP address. Once you know your router's IP address, introduce it into your browser's URL Address. You'll be directed to the user login panel. There introduce your router user and password.
If you forgot your username and password you can follow these instructions to recover them. If you haven't changed the default user and password that comes with the router you can consult our router default usernames and passwords list. Once you're in the router's admin panel you'll be able to modify and change all internet settings.
Enter 192.168.1.245 instead of 192.168.l.245
The 192.168.l.245 is wrong, the correct IP is 192.168.1.245. It doesn't matter, you should just enter the correct IP which is 192.168.1.245
192.168.1.245 is a Private IP Address for use only inside of a Private Network. This IP Address may be utilized with an IP Address, and other many devices. You are trying to find the login for your router? You are in a good place.
Router Username and Password List for 192.168.1.245.
You haven't changed your router's username and password? Sounds good! The following listing affords the Default Credentials. Click your router from the List:
192.168.1.245. Router Admin Passwords and Login IP 192.168.1.245. is an IP address like Linksys, TP-Link and others manufacturers use as an access point or gateway. Firms give router admin access in this address to allow network administrators to configure their routers and networks. Concretely, you can control Security Options, DNS, proxy, LAN, Network Management, IP QoS , WAN, WLAN settings, DSL, ADSL, MAC, WPS block; amongst others.
List of Router's Username and Password
If you haven't changed your router's username and password. The following list provides the default credentials. Click your router from the list below:
I can't find correct IP Address or my Username & Password!
If you're been trouble to access your router at 192.168.1.245 (long loading or not loading at all), your network might be using another addess such as 192.168.1.150, 10.0.0.1 or 192.168.2.1. In that case check our router IP address list. You can also read our tutorial above to find your router's IP address for more help. Likewise, if you fail to find your crendentials to connect to your Router, i recommand to read your manual, or, ultimately, reset your Router to recover your default Username and Password. Until it't done check above the way to reset te factory settings.
I forgot my router’s Username and Password for 192.168.1.245 IP Address :/ What do I should do?
You Never changed it? Try to find them in the list, in any other case to turn the router back to factory settings, you need to hold on the button for 10 seconds (about) using a needle or toothpick then you will be able to find the defaults credentials for 192.168.1.245in the list!
Login on 192.168.1.245.
Click on the Button below to Access to your Router PanelLOGIN
75 thoughts on “192.168”
pls.fix all sittings defualt problems conection
A right royal stuff-up. NEVER change anything until you can GUARANTEE all possible scenarios have been logically and COMPREHENSIVELY laid out for the users. Hope you guys are not getting paid for this!
TENGO MAS DE 3 HORAS TRATANDO EL 192.168.188.1 Y ME MANDA A UNA PAGINA QUE NI EXISTE LO BUENO QUE LO COMPRE EN RADIOSHACK Y PEDIRE MI DINERO DE VUELTA PERO ES UNA TOTAL PORQUERIA ESTE APARATO, SOLO PERDIDA DE TEIMPO SIN RESULTADO…
What happened to Plug and Play certainly doesn’t work here
I bought the NR5101 which by the way is not on the list as of now.
I have had no end of problems with this router, i login with the default username & password and i am asked to change the password, then set the time zone, then it goes to the Wi-Fi configure page, then i click done and then i get this pop-up message – “It is impossible to retrieve the information now. Please try again.”
That’s as far as i can get as it disconnects the Wi-Fi connection, no difference if i try LAN cable.
The initial download speeds without getting to the management dashboard are bad for both 5G and 4G and the Wi-Fi 6 is flaky at best.
My conclusion: Total amateurish approach to dashboard management which you can find much better implemented on other routers and initial firmware is also sub-par going by speeds out-of-the-box.
I could of got a lemon so ordered another and got the same result.
I will not buy another ZYXEL product, that’s for sure!
it is not clear as you’d said
It was not that easy to instal, but I found out how to do it!
If you want to go directly to your log-in, that doesn’t work.
I came on this page…
All you have to do, is to take your users manual from your device, there is a network number given.
scrol to the list below and search your number there, then click on it.
You come to your page, then click on the link to your log-in.
You will be directed to your log-in.
Enter the standard pass words as shown in your user manual of your divice.
Then enter the pass word of your sim card, after that, the card is activated en now you can use your mobile internet hotspot!
I hope this info is clear for people who struggle with the instalation.
I give 4 stars, it was not as easy as it says.
I can’t set up the id and the password. This is really hard to setup. Could you tell me the easy way to setup the password.
جمال عبدالله سرحان
I don’t understand this router, I’ve don’t anything I have to do just to change this router username and password but it’s not working. I can’t even find the credentials. why?
Use Gateway number . Example – 192.168.1.1
I am pretty sure im using the correct Ip address and everytime it shows “CAN’T REACH THIS PAGE”. Help?
Reason I bought this Wi-fi extender because it was advertised as an ‘easy install’. Not for me!! I want to return it.
this is a bad thing to do
Please leave instructions for returns .
No matter what I do the router dose not work. I have spent enough time on this product and want to send it back !
I can bark the wifi passworld
HELP HELP HELP THis IS DRIVING ME CRAZY!!! THEY SAID IT WAS SO EASY. NOT TRUE CAN NEVER get logged on.
Scam Scam Scam
Be careful not to put in any private tips that can be pinged remotely through your router. I recently bought a new router for one that I was sure a remote portal…I was right!!! However now my new router is flashing and the firewall has been replaced. These ppl are giving us these default iP addresses because they are basically a open source for maleware and apps DLed from GPS,however keep check on your android webkit app that’s how they enter your phone.
I am having the same problem as the other commenters here. I believe this is a scam, and I am reporting this device as such. I would ask for my money back since this doesn’t work at all (will not allow you to sign on), but since it is obviously a scam I know that is just wishful thinking.
Thanks for wasting my time and money.
How to I recover my user name? not allowing me to log on.
this is a scam will not load up on computer with or without modem cable
paano mag paliit ng wifi
This must be a scam. There is no place to log in. All it wants to do is download software and new drivers. I don’t trust them. On the other side am I doing something wrong?
WOW after reading those comments o think 🤔 just wasted my time and money with this internet extender WOW WOW can’t connect to internet after I did the setup
I type 192.168.10.1 and hit ENTER. the bar moved a little bit and then stop and never move again. Why?
what is my password
Unlock iphone5c A1456E 2644
any answer yet? mine same way. guess will return router
I have new internet and cannot get the HP printer attached to this new internet. HELP IN SIMPLE LANGUAGE.
link cp uvr 0401E1
how do i change my password which was never changed since i got this Hitron Modem.
you must to lan cable put in pc or laptop direct and than you can change
This peace of shit doesn’t work at all, its all a scam. its not able to connect at all in tried everything but nothing worked!
whom ever is planning on buying this just don’t, its waste of your time and money thrown!!!!!!!
I have had issues with my internet for months. I was told the cable needed replaced and was then advised to try a new modem. I have the new modem, it is not working any better but I can not get to the event log now. How do I get to the event log. Please advise.
I feel like you!
i have networks up the pgibeesy”s but can”nt get my printer to work or get on line ,what the —am i doing wrong?
mam takie pytanie zresetowałem kamere i zanikł obraz
got a wi fi extender everything is working fine but when i try to log in with my routers password it comes back incorrect password i know the password is right i took it off the label on the router, could you help
how to i change my wifi password ????
how can you change our wifi password
I don’t know what’s going on with my WiFi not connecting with the internet
i can’t open it.
whats the problem… its says that it cannot be reached the site~ what happened?
need to change my password too, but how? please help.
Riddle me this, Do all or a batch of routers have the same log in number 192.168.0.1. I thought they were unique and each had their own, that mine was special. Seeing all of you expressing that you’ve forgotten the log in and password. And seek a way to bypass security. I was thinking all of your are fucking with my internet. So someone please tell me, do multiple routers share the same #’s, or are these people really screwing with my internet. Cause a lot of these request are done around the same same dates & times when I changed passwords.
how to change my password need it badly
i just realsed that you need to go on the login on thing and then look at the back or where ever your label is on your wifi and look on it if you see somthing like
for example everything is on the back of your wifi
i am glad i found mine
hope this help if you dont understant you can just reply
Why they make it so complicated to change the router password!?
Why they make so complicated to change the wifi password!?
How do I change my WiFi password
If you typed 192.168.0.27, it work?
line 49 on the Arduino sketch
how can i change password?
I don’t know how it works
When I typed 192.168.027 into my router it says it refused to connect and couldn’t reach the page.
somebody know hot to configure my ip address for me to access my avalon miner? il pay?
when i watch video in face book it very very slow however the weather is so clear but in youtube it work so smooth .
How do i change my wifi password
I want tochange my password for my wifi but dont know how